Tenneker TC-Barrel II Manuel De L'utilisateur page 156

Wheel 2x
Wheel Cap 2x
Self-Locking Nut M8 2x
Attach the two wheels to the wheel
axle and secure them by use of 2 M8
self-locking nuts.
Tighten the self-locking nuts until
they are level with the axle.
Attach the wheel covers to the
wheels afterwards.
The cart assembly is finished, turn
it into an upright position and put it
Ash Door 1x
Ash Door Lock 1x
Ash Door Hinge 1x
Ventilation 1x
Screw M5x10 4x
Washer M5 4x
Spring Washer M5 4x
Nut M5 4x
Attach the ash door, ash door bolt,
ash door hinge and ventilation as
shown using the 4 M5x10 screws,
4 M5 washers, 4 M5 spring washers
and 4 M5 nuts.
The ash door assembly is finished,
put it aside.
156 | ENGLISH
5
2x
Wheel Wheel cap
2x
M 8
aside.
6
1x
Ash Door
4x 4x
M5x10 M 5
4x
M 5
4x
M 5
2x
1x
Ash Door Lock Ash Door Hinge
1x 1x
Ventilation