Snapper ESXDHT82 Manuel D'utilisation page 15

EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
PROBLEM
Motor fails to start
when switch trigger
and micro switch are
depressed.
Motor runs,but cutting
blades do not move.
Hedge trimmer
smokes during
operation.
Motor hums, blades
do not move.
English (Original instructions)
TROUBLESHOOTING
POSSIBLE CAUSE
Battery is not secure.
Battery is not charged.
Hedger damaged. Do not
use hedge trimmer.
Hedger damaged. Do not
use hedge trimmer.
Debris or other may be
jamming the blades.
SOLUTION
To secure the battery pack, make
sure the latches on the top of the
battery pack snap into place.
Charge the battery pack according
to the instructions included with your
model.
Call for technical service.
Call for technical service.
Remove battery, clear debris
blockage from blades.
12