Positioning; Connection; Connecting The Luminaire To The Mains Voltage (Mains Version) - Waldmann SLF 500/750 Mode D'emploi

Positioning

4. Positioning
NOTICE
Material damage caused by wrong
handling.
Damage to the luminaire.
X Do not move the pivots opposite
to the intended direction of rota-
tion.
X Do not bend the flexible tube and
avoid small bending radii.
X Place the luminaire in the desired posi-
tion.
Fig. 4: Pivot and pivot screw.
X For luminaires fitted with pivots: Tighten
each pivot screw until the luminaire is
fixed in the desired position, see Fig. 4
5.

Connection

5.1 Connecting the luminaire to
the mains voltage (mains ver-
sion)
CAUTION
Electric shock caused by ingress of
moisture.
Personal injury and damage to the plug-
in power supply unit.
X Plug in plug-in power supply unit
away from a moist environment.
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the luminaire.
X Compare the mains voltage with the
nominal voltage and the frequency
specified on the rating plate and
make sure that they are identical.
Fig. 5: Power supply with plug adapters.
X Connect the connecting cable of the
luminaire to the power supply unit.
X Plug the power supply unit into a socket.
ENG
19