Display Controls - Brandt BFC644YNW Manuel D'instruction

Display controls

Use your appliance according to the following control regulations. The
corresponding functions and modes of the control panel are shown in the
picture below. When the appliance is powered on for the first time, the
backlighting of the icons on display panel starts working. If no buttons have
been pressed and the doors are dosed, the backlighting will turn off.
Controlling the temperature
We recommend that when you
start your refrigerator for the first
time, the temperature for the
refrigerator is set to 4°c and the
freezer to -1 !°c. If you want to
change the temperature, follow
the instructions below.
Caution! When
temperature, you set an average
temperature for
refrigerator
Temperatures
compartment may vary from the
temperature values displayed on
the panel, depending on how
much food you store and where
you place them.
temperature may also affect the
actual temperature inside the
appliance.
you set a
the whole
cabinet.
inside each
Ambient
1.Fridge
Press "Fridge" to set fridge
temperature between 2°C and
8°C as needed, and control panel
will display corresponding values
according to
sequence.
Or
2.Super Cool
Super
refrigerate your food
much faster, keeping
food fresh for a longer period of
time.
•Press" Super Cool" button to
activate this function. The light
will be illuminated.
•Super cool
switches off after 6 hours and the
refrigerator
the following
Cool can
automatically
15