Brandt BFC644YNW Manuel D'instruction page 65

lt may not work properly if left at a
temperature above or below the
indicated range for a long period.
Climate
Class
SN
N
ST
T
•Place your appliance in a dry place
to avoid high moisture.
•Keep the appliance out of direct
sunlight, rain or frost. Place the
appliance away from heat sources
such as stoves, tires or heaters.
Leveling of appliance
•For optimal
circulating in the lower rear section
of the appliance, the bottom feet
may need to be adjusted. You can
adjust them manually by hand or by
using a suitable spanner.
•To allow the doors to self-close, tilt
the top backwards by about 10mm.
Installing the door handles
For easier transportation, the door
handles are separately provided in a
plastic bag. You can install the door
handles as follows.
Ambient
Temperature
+10°C to
+32°C
+16°C to
+32°C
+16°C to
+38°C
+16°C to
+43°C
leveling and air
1. Lever screw covers on the left
side of the door, and then put them
back in the plastic bag.
2. Match the handle on the left side
of the door, keeping axes of screw
holes in the handle and the door in a
line, as the picture shows.
3. Fix the handle with the special
screws provided in the plastic bag.
And then install the handle covers.
Reversing the door
The side at which the door opens can
be changed, from the right side (as
supplied) to the left side, if the
installation site requires.
Warning! When reversing the door,
the appliance must not be connected
to the mains. Ensure that the plug is
removed from the mains socket.
Tools you will need
8 mm socket
wrench
Thin-blade
screwdriver
Cross-shaped
screwdriver
8mm Wrench
9