Display Controls - Brandt BFA673YNX Manuel D'instruction

Display controls

Use your appliance according to the
following control regulations. The
corresponding functions and modes
as the control panels showed in the
picture below.
When the appliance is
powered on for the first
time, the backlighting of
the icons on display
panel starts working. If
no buttons have been
pressed and the doors
are
backlighting will turn off
after 60 seconds.
The
consists of two areas
about temperature, one
area
modes.
Controlling
temperature
We
when you start your
refrigerator for the first
time, the temperature
for the refrigerator is
set to 5°C and the
freezer to -18°C. If you
want to change the
temperature, follow the
instructions below.
Caution! When
temperature, you set an average
temperature for
refrigerator cabinet.
inside each compartment may vary
from the temperatures displayed on
closed, the
control panel
about different
the
recommend that
you set a
the whole
Temperature
the panel, depending on how much
food you store and where you place
it. High or low room temperature may
also affect the actual temperature
inside the appliance.
Mode/Unlock
You can select different modes by
pressing the "Mode/Unlock" button.
When certain mode is selected, wait
for the corresponding icon to flash for
10 seconds.
All the buttons are locked if the icon
" " is illuminated,
"Mode/Unlock" button for 3 seconds
to unlock them.
Super Cool
Super cool can refrigerate your food
much faster, keeping food fresh for a
longer period.
●Press "Mode/Unlock"
select the super cool function. The
light will be illuminated.
●When the super cool function is
activated, the corresponding icon will
be illuminated.
Holiday
If you are going to be away for a long
period of time, holiday function will be
your best choice.
● Press "Mode/Unlock" button to
select the Holiday function. The light
will be illuminated.
● When the holiday function is
activated, the temperature of the
fridge is automatically switched to
press the
button to
9