Display Controls - Brandt BFC3854NX Guide D'installation Et D'utilisation

EN 4. DESCRIPTION OF THE APPLIANCE
Note: Due to unceasing modification of our
products, your refrigerator may be slightly
different from this instruction manual, but
its functions and using methods remain
EN

5. DISPLAY CONTROLS

Use your appliance according to the fol-
lowing control regulations, your appliance
has the corresponding functions and modes
as the control panels showed in the pictures
below. When the appliance is powered on for
Controlling the temperature
We recommend that when you start your
refrigerator for the fi rst time, the tempera-
ture for the refrigerator is set to 4°C and the
freezer to -18°C. If you want to change the
temperature, follow the instructions below.
Caution! When you set a temperature, you
set an average temperature for the whole
refrigerator cabinet. Temperatures inside
each compartment may vary from the
temperature values displayed on the panel,
depending on how much food you store and
the same. To get more space in the freezer,
you can remove drawers (except lower
freezer drawer),installtion bracket and inte-
grative ice maker/twistable ice tray.
the fi rst time, the backlighting of the icons
on display panel starts working. If no buttons
have been pressed and the doors are closed,
the backlighting will turn off.
where you place them. Ambient temperature
may also affect the actual temperature inside
the appliance.
1. Fridge
Press " " to set fridge temperature
between 2ºC and 8ºC as needed, and control
panel will display corresponding values
according to the following sequence.
32