Display Controls - Brandt BFD663ZNX Manuel D'instruction

Display controls

Use your appliance according to the
following control regulations. The
corresponding functions and modes
of the control panel are shown in the
picture below. When the appliance is
powered on for the first time, the
backlighting of the icons on display
panel starts working. If no buttons
have been pressed and the doors are
closed, the backlighting will turn off.
Controlling the temperature
We recommend that when you start
your refrigerator for the first time, the
temperature for the refrigerator is set
to 5°C and the freezer to -18°C. If you
want to change the temperature,
follow the instructions below.
Caution! When
temperature, you set an average
temperature for
refrigerator cabinet.
Temperatures
compartment may vary from the
you set a
the whole
inside each
temperature values displayed on the
panel, depending on how much food
you store and where you place them.
Ambient temperature may also affect
the actual temperature inside the
appliance.
1. Freezer
Press "Freezer"
temperature between -14℃ and -24℃
as needed, and the control panel will
display corresponding
according to the following sequence.
2. Super Freeze
Super
quickly
temperature and freeze
your food faster than
usual. This can lock the
vitamins and nutrition of fresh food
and keep your food longer.
●Press "Super Freeze" button to
activate the super freeze function.
The light will come on and the freezer
temperature setting displays -24°C.
●In case of the maximum amount of
food to be frozen, we recommend
that you let the appliance operates for
6 hours first.
Super freeze automatically switches
off after 26 hours.
●When super freeze function is on
you can switch off super freeze
function by pressing "Super Freeze"
or "Freezer" button and the freezer
temperature setting will revert back
to it's previous setting.
to set freezer
value
Freeze can
lower frozen
9