Brandt BFC644YNW Manuel D'instruction page 81

Caution Only after the door seals
are completely dry should the
appliance be powered on.
Replacing the LED light:
Warning: The LED light must not
be replaced by the user If the LED
light is damaged, contact the
customer helpline for assistance.
To replace the LED light, the below
steps can be followed:
1. Unplug your appliance.
2. Remove light cover by pushing
up and out.
3. Hold the LED cover with one
hand and pull it with the other
hand while pressing the connecter
latch.
4. Replace LED light and snap it
correctly in place.
25