Brandt BFC644YNW Manuel D'instruction page 69

14. Exchange wires both in the left
and right slots of refrigerator body.
15. Move the
appropriate position, adjust part
and upper door, Move the connecting
wire in the slot of upper door from
right to left, and then fix part
wire by screws .
(Please hold upper door by hand
when installing)
16. Connect electrical connector
accordance with step
install part (which is in the plastic
bag).
upper door to
and
in
and then
17. Reverse part
it onto the right corner of upper door,
then mount part . (both of which are
taken down in step
18. Take the reed switch out of the
coping block (part
mount it on another block for use
(marked with an "R" in the plastic
bag). Put the coping black just
removed back into the plastic bag.
Note:
Be sure character side of reed switch
fits well with coping block.
19. lnstall part
connecter , and then install part
20. Open the upper door, mount door
racks and then close it.
by 180"and install
)
6 in step 3) and
, connect the wire
13