C - Recommendations For Energy Saving; Maintenance; A - Discharging Condensation; Technical Data - Olimpia splendid UNICO EASY S1 Mode D'emploi

4.1.c - Recommendations for energy saving

Below find simple recommendations for reducing consumption:
• Always and constantly keep the filters clean (see maintenance and cleaning chapter).
• Keep the doors and windows of the rooms to be climate controlled closed.
• do not let sun rays penetrate freely into the room (we recommend using curtains or lowering blinds or
closing the shutters).
• Do not obstruct the air flow path (input and output) of the appliance; this, in addition to obtaining a non-op-
timal yield, also affects the correct operation of the appliance and the possibility of irreparable damages to
the appliance itself.

4.2 - MAINTENANCE

if you do not intend to use the appliance for a long period of time, work as follows:
a. Stop the air conditioner and disconnect the power supply.
b. Clean the air filters.
c. Completely discharge condensation.
d. remove the batteries from the remote control.
Checks before resuming use of the air conditioner:
a. Clean the filters after a long period of inactivity of the air conditioner.
b. Check that the air outlet or inlet are not obstructed (especially after a long period of inactivity of the air
conditioner).

4.2.a - Discharging condensation

a. disconnect the plug from the power socket.
b. Carefully move the appliance in position suitable to unload water.
c. remove the drain cap (26) (fig.22).
Make sure you correctly tightened the drain cap (26) in order to avoid water leak.
d. make water unload completely.
e. tighten the drain cap (26) (fig.23).
f. insert the plug into the power outlet and re-start the machine.

5 - TECHNICAL DATA

for the technical data, please consult the data plate applied to the product.
The unit's circuit board (PCB) is designed with a fuse to provide overcurrent protection. The specifications
of the fuse are printed on the circuit board, such as: t 3.15a/250V, etc.
• Dimensions (W x H x D)
• Working temperature limits in Cool-
ing function
• Working temperature limits in heating
function
• Working temperature limits in Dehu-
midification function
• Refrigerant gas
693 x 665 x 276 mm
18° - 32°
16° - 27°
18° - 32°
r410
EN - 23
UNICO EASY S1