Programmed Switching Off; Other Functions; A-Auto-Restart; B-Sleep Function - Olimpia splendid UNICO EASY S1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 59
b. once the set time has passed, the appliance starts with the same settings (mode, temperature and ven-
tilation speed) as those before switching off.
c. time can be set with 30 minutes steps up to 10 hours and with 60 minutes steps from 10 to 24 hours.
d. Starting the appliance or adjusting the timer setting to "0.0h" will cancel the programmed switching on
function.
3.11.b Programmed switching off
a. When the appliance is running, set the delayed switching off time.
-
on the control panel:
on the remote control: - press the key "TIMER Off" to access the function and then press the key
-
b. once the set time has passed, the appliance switches off.
c. time can be set with 30 minutes steps up to 10 hours and with 60 minutes steps from 10 to 24 hours.
d. Switching off the appliance or adjusting the timer setting to "0.0h" will cancel the programmed switching
off function.

3.12 OTHER FUNCTIONS

3.12.a Auto-Restart
a. if the appliance switches off due to interruption of power supply, it automatically restarts with the previous
settings when electrical power is restored.
3.12.b SLEEP function
• This function can be activated only from the remote control.
• This function is not available while the Dehumidification (DRY) and Fan Only (FAN) modes are
active.
a. When the appliance is running, press the key "SLEEP" on the remote control.
the icon
appears on the control panel and on the remote control display. .
the appliance will decrease (when cooling) or increase (when heating) the set temperature by 1°C (1 or
2 f) for 30 minutes.
b. then, the appliance will decrease (when cooling) or increase (when heating) the set temperature by 1°C
(1 or 2 f) for an additional 30 minutes.
c. this temperature will be maintained for 7 hours before returning to the originally selected temperature.
once this time has passed, the appliance will restart working as originally programmed.
EN - 20
- press
and set the switching off delay time with the keys +/-.
- to activate the function, press
the set time on the display stops flashing (the display returns to showing
the environment temperature).
the icon
lights up.
"TIMER Off" once or more until the switching off delay time is set.
- Direct the remote control towards the appliance; a beep confirms the acti-
vation of the function.
on the control panel and the indicator "Timer Off" on the remote
- the icon
control display light up.
or wait approximately 5 seconds so that

Publicité

Table des Matières
loading

Table des Matières