Transport; Storage; Disposal - Dräger FPS 7000 Notice D'utilisation

Transport

5 Transport
Transport the facepiece in a carrying box or mask bag.
6

Storage

Loosen the straps of the head harness as far as possible.

Make sure that the facepiece is dry.

Store the facepiece in its bag or storage box.

Store the facepiece in a dry, dust-free place where it will not be

deformed.
Keep the facepiece out of direct sunlight and heat.

Storage temperature: 5 °F to 77 °F (-15 °C to 25 °C).

Observe ISO 2230 and national guidelines for storage,

maintenance and cleaning of rubber products.
Dräger rubber products are treated with an agent to protect against
premature ageing which in some cases is visible as a grey-white
coating. This coating can be washed off with a brush and soapy water.
7

Disposal

Dispose of the facepiece according to local waste disposal
regulations.
180 (Use Instructions for NIOSH-approved full facepieces) Dräger FPS 7000