Table des Matières
Publicité
Connecting the dispenser pumps
Connection points for 4 time controlled dispenser
pumps which can be operated without the
multi-function module are located behind the cover
next to the electrical connection point. See the wiring
diagram supplied.
Steam connection
Steam connection must only be carried out by an
authorised installer. See the installation instructions
supplied.
A steam solenoid valve, dirt trap and steam stop
valve should be installed on-site.
A steam valve and condensate trap are available to
order from the Miele Spare Parts Department.
After setting up and connecting the machine
successfully ensure that all removable outer
panels are correctly fitted back into position.
Installation and connection
37
Publicité
Chapitres
Table des Matières
