Table des Matières
Publicité
Warning and Safety instructions
Explanation of the Warning and Safety
symbols on the machine
It is essential to read these operating
instructions.
Please refer to specific instructions, e.g.
Installation instructions
Caution, hot surfaces.
Caution, voltage up to 1000 volts.
Earthing
To avoid the risk of accidents and damage to the
machine read the operating instructions carefully
before using it for the first time. They contain
important information about the installation, safety,
use and maintenance of the machine. Keep these
operating instructions in a safe place and ensure
that new users are familiar with the content. Pass
them on to any future owner of the machine.
Correct application
~
This machine is not designed for washing items
which have been treated with dangerous or
flammable substances.
~
Only use the machine to wash items which are
specified by the manufacturer to be
machine-washable on the wash-care label.
Any other applications may be dangerous. The
manufacturer is not liable for damage resulting from
improper use or operation.
~
Chemical dry cleaning agents must not be used in
this machine. Most dry cleaning agents, e.g. benzine,
pose a fire and explosion hazard.
~
Petrol, paraffin, or any easily flammable liquid
must not be stored or used near the machine. Do not
use the machine lid as a storage shelf.
Fire and explosion hazard.
~
Do not store any chemicals on the machine lid
(liquid detergent, fabric conditioners etc). They could
discolour the lid and also damage the surface finish.
If any chemicals should come in contact with the
surface, wipe them away immediately with clean
water. Then dry with a soft cloth.
4
~
When used in a commercial environment ensure
that all operators are trained to use the machine
correctly.
If the machine is used in a publically accessible
room, please ensure that operators are able to use it
safely.
~
This machine is not intended for outdoor use.
Technical and electrical safety
~
The electrical safety of this machine can only be
guaranteed if connected to a correctly installed
earthing system on site. It is most important that this
basic safety requirement is present and tested
regularly, and where there is any doubt, the on-site
electrical wiring should be inspected by a qualified
electrician. The manufacturer cannot be held liable
for the consequences of an inadequate earthing
system (e.g. electric shock).
~
Do not damage, remove or bypass the safety
features, fixtures and control elements of this
machine.
~
Do not use a machine with damaged controls or
cables. These must be repaired before it is used
again.
~
Any removable outer panels must be back in
place, and all moving or electrical parts shielded
before the machine is switched on.
~
Connection should be made via a suitable isolator
which complies with local and national safety
regulations and which is easily accessible for
disconnecting the machine from the electricity
supply. Provision must be made on site to switch off
all poles.
~
The machine is only completely isolated from the
electricity supply either when it is switched off at the
isolator switch or the mains fuse has been withdrawn.
~
Repairs to electrical or steam operated machines
may only be carried out by a suitably qualified person
in accordance with national and local safety
regulations.
Repairs and other work by unqualified persons could
be dangerous.
The manufacturer cannot be held liable for
unauthorised work.
~
Do not force the drum door open. The door handle
is fitted with an safety device to ensure that the door
lock functions correctly.
~
Faulty components must only be replaced by
genuine Miele original spare parts. Only when these
parts are fitted can the safety standards of the
machine be guaranteed.
Publicité
Chapitres
Table des Matières
