Storage; Waste Disposal And Environmental Protection; Spare Parts; Technical Specifications - Grizzly ERM 1438 G Traduction De La Notice D'utilisation Originale

Storage

To reduce the space required in
storage, loosen the four clamping
levers and flap down the curved
handle and bottom bar. Make sure
the cables are not caught.
• Keep the equipment dry and out of
reach of children.
• Allow the motor to cool before storing
the equipment in a confined space.
• Do not cover the equipment with nylon
bags as moisture could build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
Waste disposal
and environmental
protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center.
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Machines do not belong with do-
mestic waste.
• The plastic and metal parts employed
can be separated out and thus recy-
cled use can be implemented. Ask our
Service-Center for details
• Defective units returned to us will be
disposed of for free.

Spare parts

When ordering spare parts, please use
the indicated Service-Center address
or fax number. Please indicate the part
number with your order.
Spare blade ............................. 13700231
Grass catcher ........................... 91095400

Technical Specifications

Electric Lawnmower
Motor input power
Mains voltage .............. 220-240V~, 50 Hz
Protection class ..................................II
Protection type................................... IP24
Idling speed ..............................3600 min
Cutting circle ....................................38 cm
Cut height ............. 25/35/45/55/65/75 mm
Weight ...........................................17,5 kg
Lawn bag volume
Sound pressure specification
(L ) ........................71,6 dB(A), K
pA
Noise level specification
guaranteed .............................. 96 dB(A)
measured ....... 91,6 dB(A), K
Vibration (a ) .... max. 1,7 m/s
n
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
...........ERM 1438 G
......................... 1400 W
................................40 l
=2,05 dB
pA
(L )
wA
=2,05 dB
wA
, K=1,5 m/s
2
GB
-1
2
75