Appendix; Technical Specifications - Emerson TESKOM Instructions D'utilisation

• Downstream appliances and accessories must be suitable for the pressure regulator
and the application. Details about gas type, outlet pressure and flow can be found in
the technical specifications in the appendix to these instructions for use.
The temperature of the gas and the pressure regulator drops during operation.
This can produce hypothermia in the patient.
Should you have any questions or require specialist advice, please contact us or visit us
on the Internet at www.tescom-europe.com.
You will find the manufacturer's address on the last page of these instructions for use.
8

aPPENDIX

8.1

Technical specifications

Type of gas: ............................................O
Permissible inlet pressure pmax:
D45715 / D51370 .................................4 + 1 bar
D45714 / D51369 .................................8 + 2 bar
Maximum outlet pressure p2:
D45715 / D51370 .................................4 bar
D45714 / D51369 .................................8 bar
Nominal gas flow Q1:
D45715 / D51370 .................................20 l/min
D45714 / D51369 .................................25 l/min
The actual flow is dependent on the pressure difference in the pressure regulator
(see Section "Flow curves").
Permissible ambient conditions
Air humidity: ........................................... 5% to 95% rel. humidity,
Air pressure
during operation: .....................................900 hPa to 1100 hPa
Storage: ..................................................115 hPa to 2000 hPa
, Air, CO , N O
2 2 2
non-condensing
31
GB