Metrohm 756/831 KF Mode D'emploi page 99

$G starts the 'FILL' mode of the connected Dosino.
4.2.2.84. Assembly.Bur.ModeDis
Dispensing mode for the connected Dosino. The dispensing mode can only be
started and stopped via the RS Control. During a running dosification, no method can
be started at the Coulometer.
.Selected: Dispensing of volume increments or during a preset time.
.Volume, .Time: Size of the volume increments or entry of time.
.VStop:
.AutoFill:
4.2.2.85. Setup.Comport
Selects the Coulometer COM for the output of automatic info:
&Setup.Keycode
&Setup.Trace
&Setup.SendMeas
&Setup.AutoInfo
4.2.2.86. Setup.Keycode
ON means the key code of a key pressed on the Coulometer is outputted. The key
code comprises 2 ASCII characters; table of the keys with their code, see page 96. A
keystroke of key 11 is sent as follows:
The beginning of the message is marked by a space (ASCII 32).
4.2.2.87. Setup.Tree.Short
Definition of the type of answer to $Q.
.Short:
.ChangedOnly: Sends only the changed values, i.e. values which have been edited.
4.2.2.88. Setup.Trace
The Coulometer automatically reports when a value has been confirmed with
<ENTER> at the Coulometer. Message, e.g.:
The beginning of the message is marked by a space (ASCII 32).
4.2.2.89. Setup.Lock.Keyboard
756/831 KF Coulometer, Instructions of Use
Assembly.Bur.ModeDis.Selected
Assembly.Bur.ModeDis.V
Assembly.Bur.ModeDis.Time
Assembly.Bur.ModeDis.VStop
Assembly.Bur.ModeDis.AutoFill
Limit volume for the dispensing.
ON means automatic filling after every dispensing.
#11
Setup.Tree.ChangedOnly
With "ON", each path is sent with only the necessary amount of charac-
ters in order to be unequivocal (printed in bold in this manual). A combi-
nation of .Short and .ChangedOnly is not possible.
All paths are sent absolute, i.e. from the root.
&SmplData.OFFSilo.Id1"Trace"
4.2 Remote control commands
$G, $S, $H, $C
volume, time
0.0001...0.1...9999
0.25...1...86400
0.0001...9999, OFF
ON, OFF
1, 2, 1&2
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
91