SLAT RMS IP 12V Notice D'utilisation page 64

•
User management zone
This zone allows you to add or delete a user. Only the administrator can access this feature.
To add a user:
Enter the name of the new user (if the name already exists, an error message appears). If you want to give this
user administrative rights, you must check the "Administrator" box.
Finally, click Add.
The page is updated with the new user in the user list on the right.
To delete a user:
Select a user from the user list (note the "admin" user cannot be deleted). Click "Delete User".
The page is updated and the deleted user disappears from the list.
Note: the little star "*" before the name indicates that the user has administrator rights.
•
Customer description
The customer name can be changed. This name appears in the header of the pages after the name of the
product range (e.g: EVOLUTION-IP / SLAT POWER SUPPLIES with SLAT POWER SUPPLIES as the
customer description name).
•
Connection settings zone
The IP address, subnet mask and gateway address can be changed. These elements are made up of four
numbers from 0 to 255 separated by points. After making changes, you must click the "Change" button.
The redirect page then appears. 4 seconds later, the board reboots and the login page appears one second
after initialization of the board.
64
180140005Ca
Code: - NDU:
Edition: 03/18
NOT140004Ca