SLAT RMS IP 12V Notice D'utilisation page 62

7.2.4 The status page
This page represents the RMS IP SLAT power supply graphically. A menu on the left lets you go to the setup
page or log off.
The items displayed are as follows:
Elements, symbol
RMS IP
+
+
+
+
The values measured:
•
Battery voltage: the value is to the left of the battery.
•
Battery current: the value is to the left of the battery.
•
The current of the load outputs: I=xxA with xx in amps.
•
Voltage Load 1: U1=xxV with xx in volts.
•
Voltage Load 2: U2=xxV with xx in volts.
62
180140005Ca
Code: - NDU:
Edition: 03/18
Meaning
Name of the product
Mains presence
Mains not present
The AC / DC converter is working properly
Indicates a fault on the AC / DC converter
Fuses are in good condition
Indicates a fault on the fuse. WARNING: the battery
fuse is shown but no fault is managed.
The battery switch is closed
The battery switch is open
Flow direction of the cable in question
Represents the battery
Faulty battery circuit
Faulty Back-up: the battery is empty and the product
will soon shut down
NOT140004Ca