Dismantling, Transport And Storage; Disposal; Faults And How To Remedy Them - Heidolph REAX top Mode D'emploi

DISMANTLING, TRANSPORT AND
DISMANTLING, TRANSPORT AND
STORAGE
STORAGE
Dismantling
1. Switch off the appliance and disconnect it
from the mains (allow to cool).
2. Remove any apparatus around the shaker
so that the appliance can be dismantled
without difficulty. Remove the glass set
and dismantle the entire appliance and all
the parts in the reverse order to assembly.
Transport and storage
1. Place the appliance and the parts in the
original packing or in another suitable con-
tainer in order to avoid damage during
transit. Seal the packing with adhesive tape.
2. Keep the appliance in a dry place.
Caution: Avoid knocks and vibrations
when transporting the appliance.

DISPOSAL

DISPOSAL
Please make sure that any old or defective
appliances are taken to a collection point and
disposed of professionally. Collect the metal,
glass and plastic parts separately.
Please also dispose of the packing materials
in an environment-friendly manner (sorting).
FAULTS AND HOW TO
FAULTS AND HOW TO
REMEDY THEM
REMEDY THEM
No shaking movement:
Check the mains lead and power supply.
The ON/OFF switch is not switched on (see
Operation, page 16).
The slide switch is not in the right position
(see Operation, page 16).
The speed selected is too low (increase
speed).
In tilt operation, not enough pressure on
the tray (increase pressure by hand).
In tilt operation, the reaction vessel exerts
pressure on the tray at an angle (switch
over to continuous operation, if necessary)
(see Operation, page 16).
The motor is defective (requires service).
The switch is defective (requires service).
The control electronics are defective
(require service).
E
17