Setting Call Confirmation - Renkforce 751514 Notice D'emploi

10.16 Setting call confirmation

This menu item allows you to set whether it is sufficient that one of the people called confirms the alarm
message or whether all the people whose telephone numbers you have entered need to do so.
Example 1:
You have programmed 3 telephone numbers.
The call sequence is set to 2.
Message repetitions is set to 2
The call confirmation code is set to 0 (factory setting).
In an alarm situation the sequence without confirmation is as follows:
Telephone number
1st number
2nd number
3rd number
1st number
2nd number
3rd number
Text message
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
1st repetition - signal tone
2nd repetition - signal tone
Telephone dialler hangs up
Telephone dialler hangs up
Telephone dialler hangs up
Telephone dialler hangs up
Telephone dialler hangs up
Telephone dialler hangs up
121