Introduction; Explanation Of Symbols - TOOLCRAFT TCBS 20-LI Solo Mode D'emploi Original

1. Introduction

Dear customer,
Thank you for purchasing this product.
This product complies with statutory national and European regulations.
To ensure that the product remains in this state and to guarantee safe operation, always follow the instructions in
this manual.
These operating instructions are part of this product. They contain important information on setting up and
using the product. Do not give this product to a third party without the operating instructions. Therefore,
retain these operating instructions for reference!
All company and product names are trademarks of their respective owners. All rights reserved.
If there are any technical questions, please contact:
International:
United Kingdom:

2. Explanation of symbols

The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g. due to an electric
shock.
The symbol with an exclamation mark in a triangle is used to highlight important information in these oper-
ating instructions that must be observed
The arrow symbol indicates special information and advice on how to use the product.
The product must only be used in dry, indoor locations. It must not get damp or wet.
Wear ear defenders.
Wear a dust mask.
Wear safety goggles when using the product.
Always follow these operating instructions.
16
www.conrad.com/contact
www.conrad-electronic.co.uk/contact