Technical Data - TOOLCRAFT TCBS 20-LI Solo Mode D'emploi Original

12. Technical data

Rated voltage
Suitable battery
Tool holder
Gearbox type
Idle speed
Torque settings
Max. torque
Max. drill diameter
Sound pressure level L
Sound power level L
WA
K & K
pA wA
Total vibration level accord-
ing to EN60745
Operating conditions
Storage conditions
Dimensions (L x W x H)
Weight
Warning!
The noise level of the appliance may exceed 80 dB(A). Wear suitable ear defenders to prevent hearing
damage.
The vibration emission value stated in this manual was obtained using a standardised EN 60745 test pro-
cedure. The result can be used to compare vibration levels of different electrical tools. It can also be used
to obtain a preliminary estimate of your exposure to vibrations.
The specified value indicates the vibration level when the tool is used for its intended purpose. The actual
vibration level may differ from the specified value if the tool is used for other purposes, if other tools are
used, or if the tool has not been serviced properly. These factors can considerably increase your exposure.
For an accurate estimate of your exposure, account for the times when the stapler is switched off or not in
use. These factors can considerably reduce your exposure.
Take additional safety measures to protect the user against the effects of vibration, e.g.: Maintenance of
electric tool and insertion tools, keeping your hands warm, organisation of work processes.
pA
Drilling into metal
20 V/DC
Li-ion, 20 V, 2 Ah or 4 Ah (40 Wh or 80 Wh)
Keyless chuck, 2 - 13 mm
Two-speed gearbox
1st gear: 0 - 400 U/min 2nd gear: 0 - 1500 rpm
21 + 1 Drill setting
1st gear: 40 Nm, 2nd gear: 20 Nm
Wood: 20 mm, steel 10 mm
89.9 dB(A)
99.9 dB(A)
3 dB(A)
Vibration emission value a
Uncertainty K = 1.5 m/s
Temperature 0 °C to +40 °C,
relative humidity 30% to 75%, non-condensing
Temperature 0 °C to +40 °C,
relative humidity 0% to 75%, non-condensing
198 x 88 x 226 mm
1.15 kg (without battery)
=1,746 m/s
2
h, D
2
27