Kenmore 970-6784 Série Guide D'utilisation Et D'entretien page 24

Setting Oven Controls
• Setting Convection Convert Feature
• Setting Add 1 Minute Feature
To set the Convection Convert feature
The CONV CONVERT pad is used to automatically convert a standard baking recipe for convection baking. When set
properly, this feature is designed to display the actual converted (reduced) temperature in display.
Convection Convert MUST be used with a Convection Bake keypad. When used with a Timed Bake or a Delayed Timed
Bake setting, the Convection Convert feature will display a "CF" for check food when the bake time is 75% complete (See
Fig. 4). At this time the oven control will sound 3 long beeps at regular intervals until baking has finished. When the bake
time has completely finished the control will display "End" and will sound 3 long beeps every 30 seconds until the
is pressed (See Fig. 5).
INSTRUCTIONS
Using Convection Convert feature to adjust oven
temperature from a Bake recipe (example below
when setting oven for 350°F):
1. Arrange interior oven racks and place food in oven.
2. Press , (See Fig. 1). If a Cook Time or a Delay Start is
desired, enter the times now.
3. Press . "CONV BAKE" and the oven set temperature
adjustment will appear in the display (for this example it is
325°F). A beep will sound once the adjusted oven set
temperature is reached. (See Fig. 2).
Notes: When used with a Cook Time or a Delay Start setting,
the Convection Convert feature will display a "CF" for check food
when the bake time is 75% complete (See Fig. 3). At this time the
oven control will sound 3 long beeps at regular intervals until baking
has finished. When the bake time has completely finished the
control will display "End" and will sound 3 long beeps every 30
seconds until the
The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating
(See Figs 2 or 3)
Press to cancel Convection feature at any time.
Note: The minimum amount of cook time using the Convection
Convert feature with a Cook Time or a Delay Start function is
20 minutes.
To Set Add 1 Minute Feature
The ADD 1 MINUTE pad is used to set additional minutes to the Minute Timer. Each time the
minute is added to the Minute Timer if the Minute Timer is already active. If the Minute Timer is not active and the
pressed, the Minute Timer feature will become active and will begin counting down from 1 minute.
When the Minute Timer reaches the end of the set time, the timer will display "End" and signal 3 long beeps at regular intervals
until is pressed. If a Minute Timer function has ended pressing
on how to set the Minute Timer feature see To Set the Minute Timer instructions.
pad is pressed (See Fig. 4).
PRESS
will restart the timer at 1 minute. For further information
24
pad
DISPLAY
Fig. 1
Fig. 2
Fig. 3
Fig. 4
pad is pressed, another
pad is