Kenmore 970-6784 Série Guide D'utilisation Et D'entretien page 16

Setting Oven Controls
• Silent Control Operation
Setting Silent Control Operation
The DELAY START
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation:
1. To tell if your range is set for normal or silent operation press
and hold for 7 seconds. "- -:- -" will appear and "DELAY"
will flash in the display (Fig. 1).
2. Press to switch between normal sound operation and silent
operation mode. The display will show either "SP" (Fig. 2)
or "- -" (Fig. 3).
If "SP" appears (Fig. 2), the control will operate with normal
sounds and beeps. If "- -" appears (Fig.3), the control is in the
silent operation mode.
3. Press to accept the change or press
change.
and FLEX CLEAN pads control the Silent Control operation feature. The Silent Control
PRESS
for 7seconds
to reject the
16
DISPLAY
or
Fig. 1
Fig. 2
Fig. 3