Nikon P-TACTICAL SUPERDOT Mode D'emploi page 12

Adjusting the sight
En
CAUTION
The following should be done at an approved range or other safe area. Ear and eye protection is recommended.
Fr
1. Remove the turret caps from the turrets.
De
2. Place the firearm on a solid support.
3. Press either the "+" button or "−" button to turn on the sight.
Se
4. Look through your sight and rotate the windage and elevation adjustment turrets using the protrusion of the turret cap to align the red dot with the target.
5. Fire several shots and make windage and elevation adjustments until the shot pattern is on the center of the target.
Ru
• Each click of the adjustment turrets moves the point of impact by 1 MOA (approx. 1 in. at 100 yd., 1/2 in. at 50 yd.).
6. Replace the caps on the turrets.
Fi
Cz
12
En
Fr