Attaching The Transmitter Or Receiver To Clothing - Sennheiser System 2015 Notice D'emploi

18
Connecting audio sources to the transmitter
You can connect audio sources such as a CD player, a television, or the sound
card of a computer to the line input of the transmitter.
Connect the 3.5 mm jack plug of the connecting cable to the transmitter's
3.5 mm jack socket (LINE)
Via the operating menu, adjust the sensitivity of the line input (see
"Adjusting the sensitivity of the line input" on page 30).
Note:
If the transmitter is configured so that the line input is switched off, the
display for line level is not shown on the display panel. Consult your
technical expert for details.

Attaching the transmitter or receiver to clothing

Attaching the transmitter or receiver to clothing using the belt clip
Using the supplied belt clip, you can attach the transmitter or receiver to
clothing (e.g. belt, waistband).
The clip is detachable so that you can also attach the transmitter or receiver
with the antenna pointing downwards. To do so, withdraw the clip from its
fixing points and attach it the other way round.
.