Adjustment Tips For The Operating Menu Of The Transmitter - Sennheiser System 2015 Notice D'emploi

SENSIT (MIC)
SENSIT (LINE)
30
Adjustment tips for the operating menu of the
transmitter
Adjusting the microphone sensitivity
Via the "SENSIT (MIC)" menu, you can adjust the sensitivity of the connected
microphone in 32 steps. Adjust the microphone sensitivity so that the display
for microphone level (MIC)
loudly. The yellow LED
Note:
For monitoring the adjusted microphone sensitivity, the display for
microphone level (MIC)
when the microphone is muted.
Adjusting the sensitivity of the line input
Via the "SENSIT (LINE)" menu, you can adjust the sensitivity of the line input
in 32 steps.
The input sensitivity is adjusted too high when loud passages cause
overmodulation in the transmission link. In this case, the yellow LED
´
light up for longer periods of time. If, on the other hand, the sensitivity is
adjusted too low, the transmission link will be undermodulated, which would
result in a signal with high background noise.
The sensitivity is correctly adjusted when the display for line level (LINE)
shows full deflection only during the loudest passages.
Note:
If the sensitivity of the line input is set to "OFF", the display for line level
(LINE) is not shown on the display panel.
shows full deflection only when you speak very
should only light up briefly.
always indicates the microphone level – even
will