Indications And Displays On The Receiver - Sennheiser System 2015 Notice D'emploi

10

Indications and displays on the receiver

Battery status indication
The 4-step battery status display
provide information on the capacity of the BA 2015 accupack or the batteries:
3 segments:
2 segments:
1 segment:
Battery status display
and red LED flashing:
Warning indication for missing RF signal
The red LED lights up constantly when no RF signal is being received, e.g.
because the microphone of the transmitter is muted.
Audio signal indication
The green LED lights up when an audio signal of sufficient strength (e.g.
the voice of the speaker) is being received.
Alphanumeric display
After switching on the receiver, the alphanumeric display
name of the receiver. After approx. three seconds, the standard display
appears, indicating the channel bank (5) and the channel (01).
on the display panel and the red LED
capacity approx. 100 %
capacity approx. 70 %
capacity approx. 30 %
LOW BAT (you should immediately
replace the accupack or the
batteries)
first displays the