Working With The Operating Menu - Sennheiser System 2015 Notice D'emploi

Working with the operating menu

By way of example of the "CHAN" menu, this section describes how to use the
operating menu.
After switching on the transmitter, the alphanumeric display first displays
the name of the transmitter. After approx. three seconds, the standard
display appears.
Getting into the operating menu
Press the SET button to get from the standard display into the operating
menu. The last selected menu flashes on the display.
Selecting a menu
Press the / rocker button (UP/DOWN) to select a menu.
Press the SET button to get into the setting mode of the selected menu.
The current setting that can be adjusted flashes on the display.
Adjusting a setting
Press the / rocker button (UP/DOWN) to adjust the setting.
By briefly pressing the
forwards or backwards to the next setting. In the "SENSIT" and "CHAN"
menu, the / rocker button features a "fast search" function: If you
hold down the or
you to get fast and easily to your desired setting. The new setting flashes
on the display until it is stored.
Storing a setting
Press the SET button to store the setting. "STORED" appears on the
display, indicating that the setting has been stored. The display then
returns to the top menu level.
/ rocker button, the display jumps either
button, the display cycles continuously, allowing
27