Sennheiser System 2015 Notice D'emploi page 37

Selecting a menu
Press the / rocker button (UP/DOWN) to select a menu.
Press the SET button to get into the setting mode of the selected menu.
The current setting that can be adjusted flashes on the display.
Adjusting a setting
Press the / rocker button (UP/DOWN) to adjust the setting.
By briefly pressing the
forwards or backwards to the next setting. In the "FADE","TUNE","NAME"
and "ACCESS" menu, the
function: If you hold down the
continuously, allowing you to get fast and easily to your desired setting.
The new setting flashes on the display until it is stored.
Storing a setting
Press the SET button to store the setting. "STORED" appears on the
display, indicating that the setting has been stored. The display then
returns to the top menu level.
With most menus, new settings become effective immediately without
having to be stored. An exception are the "RESET" menus of both
transmitter and receiver and the "TUNE" menu of the transmitter. With
these menus, new settings only become effective after they have been
stored.
Exiting the configuration menu
When in the configuration menu, briefly pressing the
cancel your entry (ESC function) and return you to the "SETUP" display
without storing the setting.
/ rocker button, the display jumps either
/ rocker button features a "fast search"
or button, the display cycles
/ button will
ON OFF
37