Güde GF 600 Traduction Du Mode D'emploi D'origine page 6

GB
Please read carefully the following Operating Instructions before putting the appliance into operation
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved.
Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions?
We will quickly help you and without needless bureaucracy at our home page www.guede.com in the Service part. Please help us be able to
help you. In order to be able to identify your appliance in case of claim, we need the serial No., Order No. and year of production. All this data
GB
can be found on the type label. Please enter the data below for future reference.
Serial No.:
Tel.: +49 (0) 79 04 / 700-360
Marking:
Product safety:
Product corresponds to appropriate
standards of the EU
Prohibitions:
General prohibition mark
Do not Reach in Equipment
Warning:
Warning/attention
Commands:
Read the Operating Instructions!
Wear safety gloves!
Environment protection:
Dispose waste professionally so as
not to harm the environment.
Any damaged or disposed electric
or electronic devices must be
delivered to appropriate collection
centres.
Package:
Protect against humidity
Illustrative pictures! Translation of original operating instructions.
Order No.:
Fax:
Using the appliance when wet
prohibited!
Don´t pull the cable
Wear safety footwear
Packing cardboard material
may be delivered to collecting
centres for recycling.
This side up
Year of production:
+49 (0) 79 04 / 700-51999
Technical data:
Engine power
Revolutions per minute
Cutting Depth 90 °
Appliance
Tile-saw GF 600
Housing made of powder coated steel, stainless steel table
with embossed millimeter scale.
Appliance description (pic. 1)
1. Work desk
2. Saw disc
3. Tray
4. Stop bar
5. Saw disc cover
6. Cutting mask 45
Intended Use
•
Transmission tile cutter to work small and middle-
sized tiles.
•
Cutting with diamond disc.
•
Jolly-cuts with folding work desk.
•
Disc water-cooling.
• Cooling water tank.
• Removable tray. Pull out to the stop, lift the unit a bit
so as the tray may be removed completely.
EU Declaration of Conformity
We,
Güde GmbH & Co. KG
Birkichstraße 6
74549 Wolpertshausen
Germany, hereby declare the conception and construction
of the below-mentioned appliances correspond - at the
type of construction being launched - to appropriate basic
safety and hygienic requirements of EC Directives.
In case of any change to the appliance not discussed with
us the Declaration expires.
Marking of appliances:
Order No.
6
E-Mail: support@ts.guede.com
Connector
Diameter of the diamond wheel
Weight
GF 600
55482