Scope Of Delivery / Part Names (Figure A); Technical Data; Correct Use; Safety Notes - Crivit AT-2154 Notice D'utilisation

Congratulations! With your purchase you
have decided on a high-quality product. Get to
know the product before you start to use it.
Carefully read the following instruction manual.
Use the product only as described and only for
the given areas of application.
Keep these instructions safe. When passing the
product on to a third party, always make sure
that the documentation is included.
Scope of delivery /
Part names (figure A)
1 x Arm and leg trainer with resistance screw
and display (incl. AAA battery LR03) (1)
1 x Foot, small (2)
1 x Foot, large (3)
2 x Pedals (4)
4 x Screws (5)
4 x Washers (6)
1 x Allen key with screwdriver (7)
1 x Wrench (8)
1 x Instructions for use

Technical data

Dimensions: approx. 42 x 31 x 38cm
(W x H x D)
Weight: approx. 4.8kg
Maximum load capacity: 100kg
Device class: HC (for use in private households,
precision C) / not suitable for therapeutic
training
This training device is independent of rotational
speed
Power supply: 1.5 V battery type AAA, LR03

Correct use

The article is not designed for commercial use.
The article allows the user to train arms and legs;
fitted with a resistance screw to increase and
maintain mobility. An integrated display shows
the training progress.
24 GB

Safety notes

Important: Read the in-
structions for use through
carefully and always keep
them for future reference!
• The article is not suitable for
therapeutic purposes.
• Sit in a relaxed, upright positi-
on with a straight back during
the exercises.
• Exchange any defective parts
of the article immediately and
discontinue use until the main-
tenance is carried out.
• Please note that incorrect or
excessive training can cause
injury to health.
• Stand the article on a horizon-
tal, level surface.
• Use a non-slip mat on a smooth
surface.
• Pay attention to wear to the
parts. If the article no longer
exhibits any resistance on the
pedals then the drive belt is
worn and the article needs to
be replaced.
• An area of approx. 0.6m must
be present around the training
area (figures H and I).
• Children may not carry out
cleaning and user-maintenance
without supervision.