Nameplate; Technical Specifications - Sopur Xenon2 SA Notice D'utilisation

12.0 Nameplate

The nameplate is located on either the cross-tube
assembly or the transverse frame tube, as well as on a
label in the owner's manual. The nameplate indicates
the exact model designation and other technical
specifications. Please provide the following pieces of
information when ever you have to order replacement
parts or to file a claim:
• Serial number
• Order number
• Month/Year
SAMPLE
Sunrise Medical GmbH
Kahlbachring 2-4
D-69254 Malsch / Germany
Rollstuhl
TYPE:
Xenon2 SA ISO 7176-19:2008
kg
125 kg max 10° 400 mm
Xenon2 SA
Product Name/SKU Number.
Maximum safe slope with anti-tip tubes fitted,
Depends on wheelchair setting, posture and
max X° physical capabilities of the user.
Seat width.
XXX mm
Seat depth.
XXX mm
Load Maximum.
kg
XXX kg
CE Mark.
User's Guide.
XXXX-XX-XX Date of manufacture.
Serial number.
This symbol means Medical Device.
Manufacturer's address.
Crash tested according to
ISO 7176-19:2008
ISO 7176-19:2008.
XENON 2 SA
2021-04-20
203211533223025
420 mm
65

13.0 Technical Specifications

Maximum weight limit:
Xenon SA up to a load of 125 kg
Seat heights:
The choice of frames, forks and castors as well as the
size of the rear wheel (610 mm (24")), (635 mm (25"));
determines what seat heights are possible.
Overall width:
With standard wheels including hand rims, close mount:
• in combination with aluminium side guard:
SW + 170 mm
• in combination with plastic clothes protector:
SW + 190 mm
• With extra-narrow hand rim fitting, overall width is
reduced by 20 mm.
• With standard wheels including hand rims and 4°
Cambers: SW + 250 mm
Overall length:
910 mm with seat depth 480 mm
Overall height:
1120 mm with backrest height 450 mm
Folded dimensions:
• with rear wheels approximately 270 mm
• without rear wheels approximately 250 mm
Weight in kg:
• Overall from 10.3 kg
• Transportation Weight 7.8 kg
• Side guard (unit) 1.3 kg
• Wheels (unit) 2.2 kg
The wheelchair conforms to the following standards:
1. Requirements and test methods for static, impact and
fatigue strengths (ISO 7176-8)
2. Flammability resistance of upholstered parts in
accordance with ISO 7176-16 (EN 1021-1/2)
Rev.G