Nameplate; Technical Specifications - Sopur Xenon 2 FF Notice D'utilisation

12.0 Nameplate

The nameplate is located on either the cross-tube
assembly or the transverse frame tube, as well as on a
label in the owner's manual. The nameplate indicates the
exact model designation and other technical
specifications. Please provide the following pieces of
information whenever you have to order replacement
parts or to file a claim:
• Serial number
• Order number
• Month/Year
SAMPLE
Sunrise Medical GmbH
Kahlbachring 2-4
D-69254 Malsch / Germany
Rollstuhl
TYPE:
Xenon2
110 kg max 10° 360 mm
Xenon2
Product Name/SKU Number.
Maximum safe slope with anti-tip tubes fitted,
Depends on wheelchair setting, posture and
physical capabilities of the user.
max X°
Seat width.
XXX mm
Seat depth.
XXX mm
Load Maximum.
kg
XXX kg
CE Mark.
User's Guide.
XXXX-XX-XX Date of manufacture.
Serial number.
This symbol means Medical Device.
Manufacturer's address.
Crash tested according to
ISO 7176-19:2008
ISO 7176-19:2008.
XENON 2 FF
2021-04-20
203211533223022
360 mm

13.0 Technical Specifications

Overall width:
With standard wheels including hand rims, close mount;
• in combination with aluminium side guard:
SW + 170 mm
• in combination with plastic clothes protector:
SW + 190 mm
• With extra-narrow hand rim fitting, overall width is
reduced by 20 mm.
• With standard wheels including hand rims and 4°
camber: SW + 250 mm
Overall length:
910 mm with SD 480 mm
Overall height:
1120 mm with BH 450 mm
Weight in kg:
• Overall from 8.8 kg
• Transportation (without footrest, wheels, side guard),
6.3 kg
• Side guard (unit) 1.3 kg
• Wheels (unit) 2.2 kg
Maximum weight limit:
Xenon up to a load of 110 kg or 140kg, depending on
frame version.
Seat heights:
The choice of frames, forks and castors as well as the
size of the rear wheel (610mm (24")), (635mm (25"));
determines what seat heights are possible.
The wheelchair conforms to the following standards:
1. Requirements and test methods for static, impact and
fatigue strengths (ISO 7176-8)
2. Flammability resistance of upholstered parts in
accordance with ISO 7176-16 (EN 1021-1/2)
63 Rev.G