Controls - Pentair Flotec HYDROBLASTER 2.5 V Notice D'utilisation

EN
CHAPTER 3

CONTROLS

1) ENGINE SWITCH
The engine switch enables and disables the ignition system.
The engine switch must be in the ON position for the engine to run.
Turning the engine switch to the OFF position stops the engine
The choke lever opens and closes the choke valve in the carburetor.
Set lever "CLOSE" for starting a cold engine.
After starting, set the choke lever to "OPEN" position
2) CHOKE LEVER
Open
3) RECOIL STARTER GRIP
Pulling the starter grip operates the recoil starter to crank the engine.
CAUTION : Don't let the lever suddenly rebound, lightly put the lever back.
4
The engine switch
OFF
ON
Choke lever
Close
ORIGINAL INSTRUCTIONS