Starting Engine - Pentair Flotec HYDROBLASTER 2.5 V Notice D'utilisation

EN
CHAPTER 5
OPERATION

STARTING ENGINE

1) To start a cold engine, move the choke lever to the "CLOSE "position.
To start a warm engine, turn the choke lever to the" OPEN" position.
Choke lever
Open
2) Move the throttle lever away from the "LOW" position, about 1/3 of the way toward the "HIGH" position.
Governor lever
3) Turn the engine switch to the "ON "position
8
Close
The engine switch
ON
ORIGINAL INSTRUCTIONS