Fixing The Lower Brackets - Atag WDD9074MM Notice D'utilisation

INSTALLATION

Fixing the Lower Brackets

Warning: If the cooker top is made from a material that does not allow
the screws 12c to be inserted, use anamount of silicone to glue the
brackets 7.2 to the top and allow it to dry completely before proceeding
with the installation.
• Screw the brackets 7.1 to the front of the hood canopy using the
screws 12a provided.
• Before tightening the upper brackets completely, make all the
adjustments to allow them to rest on the lower base of the worktop
to avoid deformation of the upper brackets 7.2 as shown in the figure.
12a
7.1
7.1
12a
EN 17