Atag WDD9074MM Notice D'utilisation page 79

USE
Switching fan on/off
Always adjust the fan speed to the current conditions. If there is a lot of
condensation select a higher fan speed.
• Switch on the fan using the On/Off button (1) and select the
required extractor setting using buttons '4' and '6'.
The display '5' indicates which setting has been selected.
• Press the intensive button '7' to activate intensive setting.
The fan runs for 6 minutes at the highest setting.
After 6 minutes the intensive setting will return automatically to setting 2.
Switching lighting on/off
• Use button '9' to switch the lighting on or off. The lighting will switch
on at maximum setting.
Dimming the lighting
• Dim the lighting by depressing the '9' button for 2 seconds.
The lighting strength will change from maximum to minimum.
Depress lighting button '9' again to return to maximum setting.
Clean Air function
The Clean Air function allows you to freshen the air in your kitchen
automatically. The fan will switch on automatically for 10 minutes every
hour at the lowest setting. The cooker hood will switch off after 24 hours.
• Press the Clean Air button '3'.
The 'Clean Air' indication appears in the display.
• Press the on/off button (1) to de-activate the Clean Air function.
EN 7