Atag WDD9074MM Notice D'utilisation page 80

USE
EN 8
Saturation indicator
The relevant symbol will flash in the display to indicate the saturation of
the grease or carbon filter.
Grease filter indicator
• Clean the grease filter when the 'Filter' cleaning symbol appears in
the display (see chapter 'Maintenance').
Carbon filter indicator
• Replace the carbon filter when the 'carbon filter' cleaning symbol
appears in the display (see chapter 'Maintenance').
Resetting saturation indicators
• Switch off the cooker hood using the On/Off button (1).
• Depress the '-' button (4) for two seconds.
The saturation indicator has been reset. The symbol will disappear
from the display.
Setting the display for recirculation
Prior to use on a recirculation system set the display to 'recirculation'.
• Switch off the cooker hood using the On/Off button (1). Ensure that
the cooker hood is connected to the power supply!
• Depress '+' (6) for 2 seconds until the 'carbon filter' cleaning
symbol lights up twice in the display.
The display is now set for use on a recirculation system.
• Press the '+' button (6) several times to return to the fan system
(the 'carbon filter' cleaning symbol will light up once in the display).