Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Drilling the support surface and fitting the Hood
Inserting the hood canopy into the support surface from above
EN 16
Important
The minimum distance between the opening for the hob and the
one for the hood must be of at least 3-5 cm according to the
strength of the material used for the working top.
•
Insert the brackets 7.2, as indicated in the figure, into the slots
provided and fix them with the screws 12a provided.
•
The hood is built ready for front installation of the motor unit.
•
Insert the hood canopy into the cooker top, drilled as described
above.
•
Centre the hood canopy with respect to the cooking hob slot.
•
Fix the hood canopy with the 2 screws 12c provided.
Publicité
Chapitres
Table des Matières
