Fixing The Electric Unit - Atag WDD9074MM Notice D'utilisation

INSTALLATION

Fixing the electric unit

• Connect the connector from the hood canopy to the motor unit
connection.
• Replace the motor unit in the support using the 2 screws removed
as described above.
• Screw the motor unit to the hood canopy using the screws 12a and
12b provided as shown in the figure.
• Connect the electric cables that come out of the lower right hand
part of the hood canopy to the connectors on the electric unit.
• Each cable connector has a corresponding connector on the
electric unit, so take care not to make mistakes when connecting up.
A
EN 21