Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Fitting the front element
EN 24
•
Lift the mobile hood canopy (see paragraph 'Use') by just a few
centimetres.
•
To stop movement, simply press down on the mobile canopy as it
lifts up.
Warning: Never block the sliding door when it is opening or closing,
except during the operations required to fit the frame.
•
Remove the sponge guards from the corners of the glass.
•
Take the front frame and insert it from above, making sure that
its tabs insert into the slots provided on the hood and sliding it to
the left.
Warning: All the tabs must be inserted.
•
Use a tool (hammer) to tap all along the front frame from right to
left until it is completely flush. A piece of wood or similar element
can be inserted between the hammer and the front frame to prevent
any damage.
•
Please refer to paragraph 'Use' for indications of how to return the
mobile canopy to the standard position.
Publicité
Chapitres
Table des Matières
