SMA RoofCommKit-P2-US Instructions D'installation page 3

SMA Solar Technology America LLC
General Warnings
All electrical installations must be carried out in accordance with the local electrical standards
and the National Electrical Code
CSA C22.1. This document does not replace and is not intended to replace any local, state,
provincial, federal or national laws, regulations or codes applicable to the installation and use of
the product, including without limitation applicable electrical safety codes. All installations must
conform with the laws, regulations, codes and standards applicable in the jurisdiction of
installation. SMA assumes no responsibility for the compliance or non-compliance with such laws
or codes in connection with the installation of the product.
The product contains no user-serviceable parts.
For all repair and maintenance, always return the unit to an authorized SMA Service Center.
Before installing or using the product, read all of the instructions, cautions, and warnings in this
manual.
Wiring of the product must be made by qualified personnel only.
Installation manual
WARNING
®
ANSI/NFPA 70 or the Canadian Electrical Code
General Warnings
RoofCommKit-P2-US-IA-xx-11
®
3