SMA RoofCommKit-P2-US Instructions D'installation page 13

SMA Solar Technology America LLC
• Guide the three guide pins on the
communication assembly through the holes in
the module.
• Carefully push the module down on the upper
edge and on the connection sockets until it
audibly snaps into both side locking tabs of the
communication assembly. The plug on the back
of the module is automatically pushed into the
socket terminal strip of the communication
assembly.
5. Tighten the fastening screw (TX25, torque: 1.5 Nm
(13 in-lb)). This additionally fixes the module in
place and grounds it in the inverter enclosure.
Installation manual RoofCommKit-P2-US-IA-xx-11
4 Mounting
CLICK CLICK
13