4.9
PAGING
When you press the Paging button
1 minute. This signal helps you find a lost handset. The symbol
The message "PAGE" appears on the display.
4.10 HANDSET LOCK
When a particular number has been locked, every phone number, starting with this number,
will be blocked and cannot be called.
•
Press the Set button
•
Press numerical button '8'.
•
Enter the 4 digit PIN code (default 0000).
•
Enter the number you want to lock (max. 3 digits). You can erase a digit by means of the
Mute button
.
•
Press the Memory button
Default setting: no handset lock.
To remove a blocked number, follow the same instructions but erase the blocked number by
pressing the Mute button
4.11 KEYPAD LOCK
When the keypad is locked, the keypad buttons can no longer be pressed, except for the Set
button
.
•
Press the Set button
•
Press numerical button '7'.
•
'
' and 'Hold' are shown on the display.
Default setting: no keypad lock.
Follow the same instructions to deactivate this function.
4.12 OUT OF RANGE WARNING
When the handset is out of the working range of the base unit during a conversation, the unit
will emit a warning signal every two seconds to warn the user that he has to move closer
towards the base unit. If the user is not in the working range of the base unit within 10
seconds, the connection will be broken.
4.13 FLASH BUTTON (R)
When you press the R button, also called flash or recall, the unit generates a line interruption
(of 100 ms). It gives you the possibility to use the special services of your telephone provider
and/or to transfer calls when you have a telephone exchange.
4.13.1 Setting the Flash time
•
Press the Set button
•
Press the R button.
•
The actual flash time is shown on the display.
Press numerical button '1' several times to change the flash time (100ms, 260ms or
•
600ms).
Topcom Cocoon 95
on the base unit, the handset emits a ringing signal for
.
. The unit emits a confirmation tone.
.
.
.
Topcom Cocoon 95
blinks on the base unit.
11