Parameter E - Bluetooth Activation; Maintenance; Faults, Causes, Remedies - Wilo Smart IF-Modul Stratos Notice De Montage Et De Mise En Service

Maintenance

Stratos Smart IF module
Smart IF module
Table 9: Parameter C - delete Bluetooth connection key
8.5

Parameter E - Bluetooth activation

Stratos Smart IF module
Smart IF module
Table 10: Parameter E - Bluetooth activation
9 Maintenance
The modules described in these instructions are maintenance-free.
10

Faults, causes, remedies

Have repairs done by qualified personnel only!
DANGER
Risk of fatal electrical shock!
Ensure there are no risks arising from electrical current!
• The pump must be voltage-free and secured against unauthorised reactivation
prior to any repair work.
• Damage to the mains connecting cables should always be rectified by a qualified
electrician only.
WARNING
Risk of scalding!
At high fluid temperatures and system pressures, allow the pump to cool down
first and then depressurise the system.
Installation and operating instructions Wilo-Smart IF-Modul Stratos, Wilo-Smart IF-Modul
Enter 1 as the parameter to delete all Bluetooth connection keys (pair-
ings).
After the command has been run, the value automatically returns to 0.
Enter 1 as the parameter to delete all Bluetooth connection keys (pair-
ings).
After the command has been run, the value automatically returns to 0.
Parameter C is set in menu < 5.2.5.0 >.
Enter 1 to activate the Bluetooth radio interface and enter 0 to deactiv-
ate it.
Enter 1 to activate the Bluetooth radio interface and enter 0 to deactiv-
ate it.
Parameter E is set in menu < 5.2.6.0 >.
en
37