Intended Use; Compatibility Of The Firmware - Wilo Smart IF-Modul Stratos Notice De Montage Et De Mise En Service

Intended use

CAUTION
Damage due to incorrect handling during transport and stor-
age!
Protect the device from moisture, frost and mechanical damage during transport
and temporary storage.
4 Intended use
ƒ
ƒ
DANGER
Risk of fatal electrical shock!
If used improperly, there is a risk of fatal injury due to electric shock!
• Never use the control inputs for safety functions.
• Never install the module in non-compatible devices.
4.1

Compatibility of the firmware

To ensure that all functions of the module are available, the following firmware ver-
sion must be installed on the product into which the module is installed:
Stratos Smart IF module
Pump
Wilo-Stratos
Table 2: Stratos Smart IF module firmware version
Smart IF module
NOTICE
The firmware version (SW) can be viewed via menu < 4.4.2.0 >.
Pump
Wilo-TOP-E
Wilo-Stratos GIGA
Wilo-Stratos GIGA B
Installation and operating instructions Wilo-Smart IF-Modul Stratos, Wilo-Smart IF-Modul
Smart IF modules are designed to externally control and signal the operating
status of Wilo pumps.
Smart IF modules are not designed for safe deactivation of the pump.
Version
≥ 5.09
Version
Not compatible
≥ 1.00
≥ 1.00
Comments
Comments
en
27