Hydraulic Kits (Optionals) - Bronpi HYDRO Série Instructions D'installation, D'utilisation Et D'entretien

12. HYDRAULIC KITS (OPTIONALS)

To complete this product range and to guarantee a perfect performance there are some pre-assembled kits which are connected to the
thermo-stove simply by connecting the pipes of the hydraulic system. All the information you need about the installation and performance is
detailed in the manual provided with each kit.
• KIT-1. (see drawing D45). Module to manage a wood-burning boiler, for hot water production destined to domestic heating and sanitary
hot water (SHW).
SHW production is a priority and it works automatically by a flow detector.
Operation:
The diverter valve carries out the recirculation of the primary water in the plates exchanger when the flow switch detects a need of SHW.
Card
Tarjeta
INIFH20
INIFH20
Going
Grupo
group
Ida
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
Actuador Actuator
Detector Flow
Intercambiador Heat exchanger
detector
de flujo
Circulator
Circulador
Return group
Grupo retorno
33
THERMO-STOVE
TECHNICAL SPECIFICATIONS
- Dimensions
Length 402mm.
Height 190mm.
Depth 250mm.
- Electrical specifications
Power supply 230Vac. Frequency 50Hz.
Power input 80W.
- Hydraulic connections
Heating thermo-stove fitting G 3/4" – 1
Installation fitting G 3/4"
Sanitary fitting G 1/2"
HYDRO RANGE
D45